pick and place machine HW-T4-44/50F

pick and place machine HW-T4-44/50F

2022-04-08 04:24:22   168

Products Description
                                                                                          Specification
Number of feeders
50
Number of IC tray
6
Number of cameras
6
Number of heads
4
Average power
400w
Positioning precision
0.01mm
The buffer range of suction nozzle
4.5mm
Power supply
220V, 50/60Hz
Compressed air
0.5-0.6Mpa
Drive motor
Panasonic servo motor
Vacuum source of suction nozzle
high-speed on-off vacuum generator with vacuum breaker
Maximum circuit board area
600X455mm
Maximum travel scope in Z axis
20mm
Tape feeder
8, 12, 16, 24mm and vibration suction (mounting pipe chip)
Maximum mounting speed
7000Pcs/H
Average mounting speed of actual mounting resistance
8000Pcs/H
XYZ drive guide rail
TBI high-precision reloading linear guide rail
Motion drive system
Panasonic high-speed DSP drive
Operating system
full-automatic chip mounter operating system independentlydeveloped by Huawei Guochuang based on Windows
operating systemand it supports windows xp
win7 operating system
Element angle
0-360°, synchronous rotation during movement
X/Y operation mode
intelligent curve of the linear acceleration and deceleration linkage
MARK point positioning
full-automatic (the MARK point can be adjust at will)
Intelligent alarm
automatic correction, automatic filling, feeding shortage alarm
Plate entering mode
automatic connection from left to right in single sectionsautomatic PCB transfer positioning. /plunger positioning

manual plate feeding.
Visual display
17-inch industrial control display, 4:3, resolution: 1280 x1024
Number of recognition cameras
One Mark recognition camera, four quick-recognition cameras and one precise-recognition camera
Adaptive mounting scope
Adaptive to 0201, 0402, 0603, 0805, 1206, diode, audion, SOT, QFPwithin 40*40mm and the pin distance ≥0.3mm

(0.5mm center distance) and BGA
Product weight
280KG
Dimension
900X1140X1340mm