pick and place machine HW-T8-72/80F

pick and place machine HW-T8-72/80F

2022-04-08 04:45:48   702

Specification
Number of feeders
80
Number of IC tray
8
Number of cameras
10
Number of heads
8
Average power
1000W
Automatic board
Three-stage track
Guide
Screw guide
Maximum mounting speed
15000 Pcs/h
Average mounting speed of actual mounting resistance
12000 Pcs/h
Maximum travel scope in Z axis
20mm
Maximum circuit board area
500×455mm
Positioning precision
0.01mm
The buffer range of suction nozzle
4.5mm
Weight
600KG
Dimension
1420*1370*1350mm
Power supply
110V/220V, 50/60Hz
Compressed air
0.5-0.6Mpa
Drive motor
Panasonic servo motor
Motion drive system
Panasonic high-speed DSP drive
Recognition mode
Simultaneous recognition of eight heads
Vacuum source of suction nozzle
High-speed on-off vacuum generator with vacuum breaker



Operating system
Full-automatic chip mounter operating system operating system.
Independently developed by us based on Windows operating system
Supports windows xp, win7
Element angle
0-360°synchronous rotation during movement
X/Y operation mode
Intelligent curve of the linear acceleration and deceleration linkage
MARK point positioning
Full-automatic (the MARK point can be adjust at will)
Intelligent alarm
Automatic correction, automatic filling, feeding shortage alarm
Plate entering mode
Automatic connection from left to right in single sections
Automatic PCB transfer positioning/plunger positioning, manual plate feeding
Visual display
17-inch industrial control display, 4:3, resolution: 1280 x1024
Number of recognition cameras
One Mark recognition camera, four quick-recognition cameras
One precise-recognition camera.
Adaptive mounting scope
Adaptive to 0201 0402, 0603, 0805, 1206, diode, audion, SOT, QFP
Within 40*40mm and the pin distance ≥0.3mm (0.5mm center distance) and BGA.